Panasonic WJ-SX150A Level Table, Add Operator Number, Operator Group, Camera Access Group

●Parameters

•Operator Number

This box displays a list of registered operators.

1-6:These are operator numbers who are registered as the factory default setting. Operator Number 1 can- not be deleted.

Timer: This operator is used for the priority change of a timer event. When the timer event's priority is higher than that of an operator, the event is valid. When an operator's priority is higher than that of a timer event, the event is invalid. This operator cannot be deleted.

•Add Operator Number

This drop-down menu is used for the new operator number selection. 7 to 16 can be added.

•Operator Group

This group configures each operator's password, level and priority.

ID: Enter an operator's ID. From 1 to 99999 are avail- able.

Password: Enter a password. From 1 to 99999 are available.

Level: Select 1, 2 or 3. Refer to Level Table for details on level setting.

Priority: Select the operator's priority from 1 (highest) to 16 (lowest).

•Camera Access Group

This group configures the camera operation coverage of each operator.

Click on each camera's checkboxes and determine the available operation.

1 (View & Control): The operator can display the cam- era image on the monitor and control panning/tilt- ing.

2 (View Only): The operator can display the camera image on the monitor, but cannot control the pan- ning/tilting.

3 (Prohibited): The operator can neither display the camera image on the monitor nor control the pan- ning/tilting.

(Add) button

Adds a new operator to WJ-SX150A.

(Edit) button

The registered parameters become editable by clicking on this button after selecting the operator number.

(Delete) button

Deletes an operator from WJ-SX150A after you select the operator.

(OK) button

Saves the configuration and closes the Operator Registration window.

■Level Table

This window configures the restrict level of each operation. The restrict level is classified in Level 1, 2, and 3.

●How to Display

To display this window, click on the (Level Table) but- ton in the main window (p. 80).

●Parameters

•Permission

Click on each checkbox to classify the following operations by three levels.

SX150A Setup: Setting up this matrix switcher system

Camera Setup: Setting up the cameras

Program Preset Position: Registering a camera's pre- set position

Camera Control: Controlling a camera

Camera Selection: Selecting a camera

Recorder Setup: Displaying the recorder's setup menu

Recorder Control: Controlling the recorder

All Alarm Reset: Resetting all the alarms

Single Alarm Reset: Resetting an alarm

Alarm Suspend: Suspending an alarm

Call Sequence: Activating a tour or group sequence

Alarm History Display: Displaying the alarm history

Video Loss History Display: Displaying the video loss

history

System Status Display: Displaying the system status

OSD Control: Controlling on-screen display (Time and date, monitor status, camera title, and event)

(Save Exit) button:

Saves the configuration and closes the Level Table window.

(EXIT) button

Cancels the configuration and closes the Level Table win- dow.

91