Panasonic WJ-SX150A manual Camera Selection

■Camera Selection

1.Select the desired monitor. (Refer to p. 106 Monitor Selection.)

2.Press the numeric buttons to select the desired camera number (1 to 99).

3.Press the CAM (SET) button.

The selected camera's image will appear on the active monitor. The CAMERA indicator will light up and the selected camera number will appear on the LED dis- play on the controller.

Note: If you select a wrong number, press the CLEAR button to clear the input.

4.If the selected camera number is not valid, the PRO- HIBITED indicator and the number on the LED display will blink for about 3 seconds.

Return to Step 2 and select a new camera number.

5.To replace the currently selected camera with the next higher-numbered camera , press the NEXT button.

6.To replace the currently selected camera with the next lower-numbered camera, press the PREV button.

F1	ACK	RESET
CAM SETUP	SUSPEND	ALL RESET
F2	GROUP SEQ	TOUR SEQ
INDEX	REW/FF
	PREV	NEXT
RECORDER	STEP
STOP		PAUSE
STOP	PLAY	PAUSE
	OSD
SETUP		SHIFT

Note: The PROHIBITED indicator will light up, if the camera is selected by an operator with higher prior- ity. Control of the same camera is denied to an operator with lower priority.

107