•EXT IN
This stands for the setting of the EXT IN connector at the unit's rear panel.
GEN LOCK ON: Select this mode to
GEN LOCK OFF: Select this mode if the asynchronous unit is connected to the recorder.
Notes:
•If GENLOCK ON is selected, the playback images can- not be displayed on the monitors which are connected to the connectors MONITOR OUT 1 to 4. Confirm the images on those which are connected to the recorder.
•If GENLOCK OFF is selected, the maximum rate recording becomes unavailable for
•To use
•When the
■Multiplexer Mode MUX
●How to Display
To display this window, click on the 
(Multiplexer Mode) button in the main window (p. 80.)
●Parameters
•Multi Monitor Out Group
Still Display: Select the desired setting by clicking on the
ON: Still picture is available during the multiscreen display.
OFF: Still picture is not available during the multi- screen display.
The factory default setting is ON.
Border Color: Select the desired setting by clicking on the
WHITE: The border will be displayed in white.
GRAY: The border will be displayed in gray.
BLACK: The border will be displayed in black.
OFF: No border will be displayed.
The factory default setting is WHITE.
Quad Shift: Select the desired setting by clicking on the
ON: Camera images are displayed in 4 multiscreen segments (quad) and switched as follows:
4A = Page 1 of the quad (Camera 1, 2, 3 and 4) 4B = Page 2 of the quad (Camera 5, 6, 7 and 8) 4C = Page 3 of the quad (Camera 9, 10, 11 and 12)
4D = Page 4 of the quad (Camera 13, 14, 15 and 16)
OFF: Quad is unavailable.
The factory default setting is OFF.
98
