Panasonic WJ-SX150A Timer Event, Hold Mode, Alarm Reset, Video Loss History Table, Sequence Mode

●Sequence Mode

In the sequence mode, the unit displays the initial alarm image on the monitor until the dwell time ends, even when another alarm input is accepted. When the dwell time ends, the unit automatically replaces the alarm image with the next one.

●Hold Mode

In the hold mode, the unit continues to display the initial alarm image until the alarm reset. With the alarm image on the monitor, the unit notifies you that more than one alarm input is accepted with "*" next to "ALARM nn (nn is the alarm number)."

●Alarm Reset

The built-in timer automatically resets the alarm operation after the time specified in WJ-SX150A Administrator Console.

After the reset, the monitor displays and the sequence will return to the state before the alarm input.

Note: When more than one alarm input has been accepted, only the newest can be reset.

Notes:

•When turning off the unit, all the history will be deleted.

•Alarm history can also be identified on the PC.

●Video Loss History Table

While the unit's power is ON, the video signal loss from a camera or a recorder can occur by cable disconnection, etc.

In this case, video loss history will be reserved in the sys- tem, and this table will display the history.

The loss order, date, time, camera number/recorder num- ber and event can be identified.

Up to 100 item can be reserved, and they are overwritten from the oldest, after more than 100 item have occurred.

	VIDEO LOSS HISTORY		1	of 2
NO	YYYY/MM/DD HH:MM:SS	CH EVENT
012	2002/08/21 18:59:08	99	VIDEO	RECOVER
011	2002/08/21 18:58:08	14	VIDEO	RECOVER
010	2002/08/21 18:57:08	99	VIDEO	LOSS
009	2002/08/21 18:55:08	07	VIDEO	LOSS
008	2002/08/21 18:54:08	R0	SW RECOVER
007	2002/08/21 18:53:08	16	VIDEO	LOSS
006	2002/08/21 18:53:00	09	VIDEO	LOSS
005	2002/08/21 18:52:08	R0	SW LOSS
004	2002/08/21 18:51:08	S1	SLAVE	DOWN
003	2002/08/21 18:50:08	S1	SLAVE	RECOVER

●Alarm Suspension

Even when an alarm signal is input, the system will deacti- vate the alarm input and the alarm mode.

When the alarm suspension is active, "ALM SUSPENDED" will appear on the monitor.

●Alarm History Table

This table displays the alarms that have occurred in the past.

The alarm order, date, time, alarm number and event can be identified.

Up to 100 item can be reserved, and they are overwritten from the oldest, after more than 100 item have occurred.

	ALARM HISTORY		1 of 2
NO	YYYY/MM/DD HH:MM:SS	ALARM	EVENT
016	2002/08/21 18:59:08	80	ALARM
015	2002/08/21 18:58:08	80	ACK
014	2002/08/21 18:57:08	80	RESET
013	2002/08/21 18:55:08	07	ALARM
012	2002/08/21 18:54:08	07	ACK
011	2002/08/21 18:53:08	07	RESET
010	2002/08/21 18:53:00	09	ALARM
009	2002/08/21 18:52:08	09	RESET
008	2002/08/21 18:51:08	06	ALARM
007	2002/08/21 18:50:08	06	ACK

As well as the video loss history, the date of the loss and recovery, the camera number and the loss status are dis- played on the table.

Notes:

•When turning off the unit, all the history will be deleted.

•Alarm history can also be identified on the PC.

■Timer Event

The built-in timer can automatically start the sequence or spot mode on the specified days, which is configurable in WJ-SX150A Administrator Console.

The available operations:

Tour sequence and spot mode

The available timer events:

Up to 50

Note: When displaying SETUP MENU while timer event is operating, the operation will stop.

18