Panasonic WJ-SX150A manual Problem, Check item, Remedy

Problem Check item Remedy

The alarm mode is not activated.

The alarm mode is set to OFF.	Set the alarm mode to SEQUENCE or
	HOLD in SETUP MENU or WJ-SX150A
	Administrator Console.
	SETUP MENU: Refer to p. 67.
	Administrator Console: Refer to p. 88.
The port for an alarm input is set to	Set the alarm port to ON in SETUP
OFF.	MENU or WJ-SX150A Administrator
	Console.
	SETUP MENU: Refer to pp. 68 to 69
	Administrator Console: Refer to p. 88.
When "ALM SUSPENDED" is displayed	Press the ACK/SUSPEND button while
on the monitor, the alarm is suspended.	holding down the SHIFT button to can-
	cel the alarm suspension.

SETUP MENU may be open.

Press the SETUP button while holding down the SHIFT button to close SETUP MENU.

ACK or RESET is not activated.

You may not have selected the alarm-	Select the monitor again. (Refer to pp.
related monitor.	106 or 125.)
The system controller is not authorized	Confirm the Monitor Selection window in
to select the monitor.	WJ-SX150A Administrator Console and
	reconfigure the setting if necessary.
	(Refer to p. 92.)
You are not authorized to reset an	Confirm the Level Table window in WJ-
alarm.	SX150A Administrator Console and
	reconfigure the setting if necessary.
	(Refer to p. 91.)
While the PROHIBITED indicator is	Open the Monitor Selection window
lighting on the system controller, you	(refer to p. 92) and reconfigure the set-
are prohibited to control the monitor.	ting if necessary.

Timer event is not activated.

A higher-priority operator may have	Select another monitor.
selected the event-related monitor.

SETUP MENU does not open.

When the PROHIBITED indicator is light- ing on the system controller, you are pro- hibited to open SETUP MENU.

Open the Level Table window (refer to p. 91) and reconfigure the setting.

The system does not enter the recorder mode.

The recorder connection may be wrong.

Connect the recommended recorder to the unit.

The connected recorder may not con- form to the unit.

Confirm the recorder connection (refer to pp. 40 to 47.)

You are not authorized to operate the recorder.

Open the Level Table window (refer to p. 91) and reconfigure the setting.

“NOT ASSIGN” is displayed beside the	When you select the LCN (logical cam-	Select an assigned logical camera num-
camera number on the monitor.	era number) not assigned in the system,	ber. (Refer to p. 107.)
	“NOT ASSIGN” will appear.
“Initializing…” is displayed on monitors.	If connections or settings are wrong, this	Confirm the connections (refer to pp. 33
	message, SLAVE n*, and the firmware	to 55) and settings (refer to pp. 57 to
	version will be displayed after you turn	102).
	on a Slave recorder.
	*n is a unit number.
(For WJ-HD500 Series recorders) You	“Error” or “TIME OUT” may be displayed	The date-and-time entry form is unavail-
cannot search for records even when car-	after pressing the PLAY button in the	able. Use Record List or Thumbnail
rying out the Search Playback procedure.	date-and-time entry form.	Display to search for records.
Recording or playback with the recorder	Camera number settings are wrong.	Conform the LCN (logical camera num-
is not correctly carried out.		ber) settings of the unit and camera
		number settings of the recorder.

150