Panasonic WJ-SX150A WJ-HD200 SERIES CONTROL TERMINAL MODE, Displaying WJ-HD200 Series SETUP MENU

WJ-HD200 SERIES CONTROL (TERMINAL MODE)

Matrix switcher can control Digital Disk Recorder WJ- HD200 Series. The following is the procedure of WJ-HD200 Series SETUP MENU.

Notes:

•The following operating procedures are for the terminal mode. If you are using a PS·Data system controller, refer to p. 143.

•When a Multiplexer board is installed in the unit, you can neither connect nor control a WJ-HD200 Series recorder. You need to remove the board from the unit.

■Displaying WJ-HD200 Series

SETUP MENU

The operations are the same as WJ-HD500 Series. (Refer to p. 130.)

■Controlling Digital Disk Recorder WJ-HD200 Series

The following are the operating procedures of WJ-HD200 Series via system controller.

Note: Refer to the operating instructions of Digital Disk Recorder WJ-HD200 Series for details.

●Recorder Mode

The operations are the same as WJ-HD500 Series. (Refer to p. 131.)

●Manual Recording

The operations are the same as WJ-HD500 Series. (Refer to p. 132.)

Note: Refer to WJ-HD200 Series Operating Instructions for details and other recording modes.

●Stopping REC ONLY Alarm Recording

The operations are the same as WJ-HD500 Series. (Refer to p. 132.)

●Search Playback

You can search playback images using the ALARM RECALL table or the SEARCH table.

Every time you press the INDEX button, the display will change as follows.

Live image → Date-and-time entry form → ALARM RECALL table → Live image

•Date-and-time Search Playback

The recorded images can be searched for through the date and time.

1.Enter the recorder mode. (Refer to p. 131 Recorder Mode.)

2.Press the INDEX button. The date-and-time entry form will appear on the center of the monitor.

F2

INDEX

●Multiscreen Segment Switching

The operations are the same as WJ-HD500 Series. (Refer to p. 131.)

Note: 4C-, 4D-, 7-, 10-, 13- and 16-segment multiscreen display are unavailable.

SEARCH

YYYY/MM/DD HH:MM 2002/05/07 19:32

●Normal Playback

The operations are the same as WJ-HD500 Series. (Refer to p. 131.)

Note: You cannot skip to the previous/next record.

Note: The factory default setting is the current date and time.

135