●Still Playback Spot Picture
The playback spot picture can be changed into the still pic- ture.
Note: To use this function, you need to connect a WJ- HD100 Series recorder or
1.Enter the recorder mode. (Refer to Multiscreen Segment Switching.)
2.Press the PLAY button. (Refer to p. 131 Normal Playback.) The system will enter the playback mode.
3.Select a camera channel by pressing a numeric button and then pressing the CAM (SET) button. The selected camera image will be displayed in a spot picture.
4.Press the button 1 while holding the SHIFT button. The selected camera image will change into the still picture.
5.To cancel the still picture, press the button 1 while hold- ing down the SHIFT button again.
Notes:
•Still picture is not available while zooming is activat- ed.
•Even when still picture is displayed, the playback of the
●Electronic Zooming (EL-ZOOM)
The playback spot picture can be electrically zoomed. Note: To use this function, you need to connect a WJ-
HD100 Series recorder or
1.Enter the recorder mode. (Refer to p. 120 Multiscreen Segment Switching.)
2.Press the PLAY button. (Refer to p. 131 Normal Playback.) The system will enter the playback mode.
3.Select a camera channel by pressing a numeric button and then pressing the CAM (SET) button. The selected camera image will be displayed in a playback spot pic- ture.
4.Press the button 4 while holding down the SHIFT but- ton.
“+” sings will appear on the image.
5.To move the “+” signs within the picture, move the joy- stick.
6.Press the button 4 while holding down the SHIFT but- ton. The area surrounded by the “+” signs will be zoomed up.
7.To move the zoom area, move the joystick.
8.To cancel the zooming, press the button 4 while holding down the SHIFT button again.
Note: Still picture is not available while zooming is acti- vated.
Note: When a
