Panasonic WJ-SX150A WV-CU360C/CU360CJ System Controller TERMINAL MODE, Front View WV-CU360C, Down

■WV-CU360C/CU360CJ System Controller (TERMINAL MODE)

A template, on which “For Matrix Switcher (WJ-SX150A)” is written, is provided with a system controller. When using the tem- plate, place it on the surface of the controller.

In these operating instructions, this template's illustrations are used for descriptions.

● Front View (WV-CU360C)			● Front View (WV-CU360CJ)
@0 @1 @2	@3@4@5	@6 @7	%3

#8

#9 $0

$1 $3

$2 $4

$6 $5 $9

OPERATE	LINK	ALARM	MONITOR		CAMERA		BUSY	PROHIBITED		WV-CU360C	tem Controller WV-CU360CJ
									System Controller
									For Matrix Switcher (WJ-SX150A)		r Matrix Switcher (WJ-SX150A)
F1	ACK	RESET							IRIS
								CLOSE	OPEN
CAM SETUP	SUSPEND	ALL RESET					CALL		AUTO IRIS	UP
									FOCUS
F2	GROUP SEQ	TOUR SEQ	T&D	CAM ID		EVENT	PRESET
								NEAR	FAR
INDEX	REW/FF		STILL	AUX1 OFF		AUX1 ON	PROGRAM		AUTO FOCUS
							PRESET			R	%4
	PREV	NEXT	MON STATUS	ALL					L
	STEP		EL-ZOOM	AUX2 OFF		AUX2 ON	AUTO PAN		ZOOM
RECORDER								WIDE	TELE
STOP		PAUSE
			ALM H	VLD H		SYS S	CAM FUNC
									REC
				DEF OFF		DEF ON			DOWN
STOP	PLAY	PAUSE	SEQUENCE
	OSD		MON (ESC)			CAM (SET)	CLEAR

SETUPSHIFT MON LOCK MULTI SCREEN SEL WIPER LOG OUT

#2	@9	%5
%2$8%1$7%0 #7#6#5 #4#3 #1#0 @8

@0Operation indicator (OPERATE)

Lights up when the controller's power is turned on.

@1Link indicator (LINK)

Lights up when communication is established with the matrix switcher.

@7Prohibited indicator (PROHIBITED)

Blinks when an operator attempts to control a monitor (or camera) that is already used by a higher-priority operator or the operator has done the prohibited opera- tion.

@8Joystick

@2Alarm indicator (ALARM)	Use this joystick to manually operate cameras, camera
Lights up when an alarm condition exists.	site accessories and a recorder, or to move the cursor
	in SETUP MENU on the active monitor screen.
@3Monitor indicator (MONITOR)	UP:	Up
Lights up when the monitor number appears on the	DOWN:	Down
LED display.	L:	Left, rewind*, backward field advance*
	R:	Right, fast-forward*, forward field advance*
@4LED Display	*Available after pressing the RECORDER button while
Displays the monitor number, camera number, numeric	connecting to a recorder.
entry and error status, etc.
	@9Iris buttons (IRIS CLOSE/OPEN)

@5Camera indicator (CAMERA)

Lights up when the camera number appears on the LED display.

@6Busy indicator (BUSY)

Lights up when the higher-priority operator selects the camera or monitor you are currently operating. Operations from the system controller are disabled until this indicator goes off.

Close or open the lens iris of cameras equipped with the specified lens.

Press the CLOSE and OPEN buttons simultaneously. The lens iris is reset to the factory default setting.

26