Panasonic A4P Series instruction manual Test Mode Step operation

[Setting]

Test Mode

• Step operation

An operation is performed at a position of a selected point number. * Execute homing completely before performing a step operation.

An example of an operation to move to the point No. 2 is shown below.

Press .

Press .

.....Point No. 1

Keep on pressing at a desired point number.

.....Point No. 2

Select a point number using￿ and/or .

	A dot ( ) moves and ￿
.....Point No. 60	then the motor rotates.

Setting

.....Point No. 1

A current position is shown ￿
during moving to a point.￿
If you press	during ￿	An error has occurred.
movement, the motor stops.		Point number An error occurs if SV.Pr02 is not set.

Movement completed

To move to the next process, press .

89