Panasonic A4P Series instruction manual Remarks on installation, LR/2, 220

Permissible Load at Output Shaft

Radial load (P) direction Thrust load (A and B) direction

LR

LR/2

P

A

GH

B

GH M

Unit : N (1kgf=9.8N)

		Permissible load at shaft
Motor output	Motor output	Radial thrust	Thrust load A￿
			and B-direction
￿	1/5￿	490￿	245￿
	1/9￿	588￿	294￿
100W￿
	1/15￿	784￿	392￿
￿
	1/25￿	1670￿	833￿
￿
	1/5￿	490￿	245￿
￿
	1/9￿	1180￿	588￿
200W￿
	1/15￿	1470￿	735￿
￿
	1/25￿	1670￿	833￿
￿
	1/5￿	980￿	490￿
￿
	1/9￿	1180￿	588￿
400W￿
	1/15￿	1470￿	735￿
￿
	1/25￿	2060￿	1030￿
￿
	1/5￿	980￿	490￿
￿
	1/9￿	1470￿	735￿
750W
	1/15￿	1760￿	882￿
	1/25￿	2650	1320
	￿

Remarks on installation

(1)Do not hit the output shaft of the gear reducer when attaching a pulley or sprocket to it. Or it may cause an abnormal noise.

(2)Apply the load of the pulley or the sprocket to as close to the base of the output shaft as possible.

(3)Check the mounting accuracy and strenght of the stiff joint, when you use it.

(4)The encoder is built in to the motor. If an excessive impact is applied to the motor while assembling it to the machine, the encoder might be damaged. Pay an extrta attention at assembly.

220