Panasonic Understanding the 32-Bit Positioning Parameter Settings for Servoprno

How to Use the Console

32-Bit Positioning Parameter

32-bit positioning parameter can be set.

Press .

.....32.Pr00

.....32.Pr01

.....32.Pr05

Press .

Selected 32.PrNo.

* The data is shown on the ￿ two screens because of ￿ a large number of displayed￿ digits.

<Notice>￿

Select an input digit (a dot blinks) by the [SHIFT] key and a parameter by the [UP]/[DOWN] key.￿ The 32-bit positioning parameter is shown on the two screens because of a large number of displayed digits.￿

If the parameter is a negative value, a dot lights. ￿

When you press the [SET] key, the parameter is modified.￿

￿

*When you press during parameter setting, any parameter in process is not changed and “No.” display is shown again.￿

*When you have set the parameters, write the parameters into EEPROM. If you turn the power supply off before writing the parameters into EEPROM, those parameters are cleared.

94