Panasonic A4P Series instruction manual Bit Positioning Parameter

[Setting]

16-Bit Positioning Parameter

16-bit positioning parameter can be set.

Press .

.....16.Pr00

Selected 16.PrNo.

.....16.Pr01

.....16.Pr63

Setting

A parameter that “ ” is displayed on this position is enabled ￿ after writing a set value in EEPROM and resetting the system.

<Notice>￿

Select an input digit (a dot blinks) by the [SHIFT] key and a parameter by the [UP]/[DOWN] key.￿ When you press the [SET] key, the parameter is modified.￿

￿

*When you press during parameter setting, any parameter in process is not changed and “No.” display is shown again.￿

*When you have set the parameters, write the parameters into EEPROM. If you turn the power supply off before writing the parameters into EEPROM, those parameters are cleared.

93