Panasonic A4P Series instruction manual How to Connect, Connect to CN, Remarks

How to Install

Console

Installation Place

1)Indoors, where the products are not subjected to rain or direct sun beam. The products are not water- proof.

2)Where the products are not subjected to corrosive atmospheres such as hydrogen sulfide, sulfurous acid, chlorine, ammonia, chloric gas, sulfuric gas, acid, alkaline and salt and so on, and are free from splash of inflammable gas, grinding oil, oil mist, iron powder or chips and etc.

3)Well-ventilated and low humidity and dust-free place.

4)Easy-to-access place for inspection and cleaning

Environmental Conditions

Item￿	Condition￿
Ambient temperature￿	0˚C to 55˚C (free from freezing)￿
Ambient humidity￿	Less than 90% RH (free from condensation)￿
Storage temperature￿	–20˚C to 80˚C (free from freezing)￿
Storage humidity￿	Less than 90% RH (free from condensation)￿
Vibration￿	Lower than 5.9m/s2 (0.6G), 10 to 60Hz￿
Impact￿	Conform to JISC0044 (Free fall test, 1m for 2 directions, 2 cycles)￿
Altitude	Lower than 1000m

<Cautions>

•Do not give strong impact to the products.

•Do not drop the products.

•Do not pull the cables with excess force.

•Avoid the place near to the heat source such as a heater or a large winding resistor.

How to Connect

Connect to￿ CN X4.

M

S

<Remarks>

•Connect the console connector securely to CN X4 connector of the driver

•Never pull the cable to plug in or plug out.

26