Recommended components | Panasonic A4P Series instruction

Recommended components									[Supplement]

Surge Absorber for Motor Brake

		Motor			Surge absorber for motor brake

MSMD	50W	to 1.0kW

MAMA	100W	to	750W			• C-5A2 or Z15D151
MHMA	2.0kW	to	5.0kW			Ishizuka Electronics Co.

MGMA	900W	to 2.0kW

MSMA	1.5kW	to 5.0kW

MDMA	4.0kW	to 5.0kW				• C-5A3 or Z15D151
MFMA	1.5kW					Ishizuka Electronics Co.

MGMA	3.0kW	to 4.5kW

MDMA	1.0kW	to 3.0kW

MFMA	400W					• TNR9V820K
						Nippon Chemi_Con Co.
MFMA	2.5kW	to 4.5kW				Nippon Chemi_Con Co.

MHMA	500W	to 1.5kW


List of Peripheral Equipments									(reference only)
									As of Nov.2004

	Manufacturer				Tel No./URL				Peripheral components

Automation Controls Company				81-6-6908-1131					Non-fuse breaker
Automation Controls Company				81-6-6908-1131					Magnetic contactor
Matsushita Electric Works, Ltd.				http://www.mew.co.jp					Magnetic contactor
Matsushita Electric Works, Ltd.				http://www.mew.co.jp					Surge absorber
									Surge absorber
Iwaki Musen Kenkyusho Co., Ltd.				81-44-833-4311					Regenerative resistor
Iwaki Musen Kenkyusho Co., Ltd.				http://www.iwakimusen.co.jp/					Regenerative resistor
				http://www.iwakimusen.co.jp/
Nippon Chemi_Con Corp.				81-3-5436-7608
Nippon Chemi_Con Corp.				http://www.chemi_con.co.jp/
				http://www.chemi_con.co.jp/
Ishizuka Electronics Corp.				81-3-3621-2703				Surge absorber for holding brake
Ishizuka Electronics Corp.				http://www.semitec.co.jp/				Surge absorber for holding brake
				http://www.semitec.co.jp/
Renesas Technology Corp.				81-6-6233-9511
Renesas Technology Corp.				http://www.renesas.com/jpn/
				http://www.renesas.com/jpn/
	TDK Corp.			81-3-5201-7229					Noise filter for signal lines
	TDK Corp.			http://www.tdk.co.jp/					Noise filter for signal lines
				http://www.tdk.co.jp/
Okaya Electric Industries Co. Ltd.				81-3-3424-8120					Surge absorber
Okaya Electric Industries Co. Ltd.				http://www.okayatec.co.jp/					Noise filter
				http://www.okayatec.co.jp/					Noise filter
Japan Aviation Electronics Industry, Ltd.				81-3-3780-2717
Japan Aviation Electronics Industry, Ltd.				http://www.jae.co.jp
				http://www.jae.co.jp
	Sumitomo 3M			81-3-5716-7290
	Sumitomo 3M			http://www.mmmco.jp
				http://www.mmmco.jp
Tyco Electronics AMP k.k,				81-44-844-8111							Supplement
				http://www.tycoelectronics.com/japan/amp							Supplement

									Connector
	Japan Molex Inc.			81-462-65-2313					Connector
				81-462-65-2313
				http://www.molex.co.jp
				http://www.molex.co.jp
Hirose Electric Co., Ltd.				81-3-3492-2161
Hirose Electric Co., Ltd.				http://www.hirose.co.jp/
				http://www.hirose.co.jp/
	J.S.T Mfg. Co., Ltd.			81-45-543-1271
	J.S.T Mfg. Co., Ltd.			http://www.jst-mfg.com/
				http://www.jst-mfg.com/
	Daiden Co., Ltd.			81-3-5805-5880					Cable
	Daiden Co., Ltd.			http://www.dyden.co.jp/					Cable
				http://www.dyden.co.jp/
	Mitutoyo Corp.			81-44-813-5410					External scale
	Mitutoyo Corp.			http://www.mitutoyo.co.jp					External scale
				http://www.mitutoyo.co.jp
				* The above list is for reference only. We may change the manufacturer without notice.

191

Image 191

Panasonic A4P Series Recommended components, Surge Absorber for Motor Brake, List of Peripheral Equipments Reference only

Contents

DV0P4490 AC Servo Motor and Driver Driver Motor Console Content Example of Dwell Timer Operation Setting Example of Incremental Operation SettingExample of Absolute Operation Setting Example of Rotary Axis Operation Setting Configuration of Absolute System Operation Timing after Power-ONWhen an Error Alarm Has Occurred at Servo-ON Command When an Alarm Has Been Cleared at Servo-ON Command Supplement Page Driver Motor Console Before Using the Products Do not put your hands in the ser- vo driver Before Using the Products Do not give strong impact shock to the Product Observe the specified voltage Type Cycles Items to be inspected Maintenance and InspectionInspection Items and Cycles Smoothing capacitor Approx years Cooling fan To 3 years Guideline for Parts ReplacementProduct Component Standard replacement Cycles hour Check of the Driver Model IntroductionOutline On Opening the Product Package Round SpecificationsCheck of the Motor Model Pulse count Check of the Combination of the Driver and the Motor Incremental Specifications, 2500P/r Absolute/Incremental Specifications, 17-bit B-frame MADDT1207P Single phase, 200V, 200W A-frameParts Description Driver F-frame MEDDT7364P 3-phase, 200V, 2.0kW E-frame Low inertia type Msmd series, 50W Motor Display/Touch panel ConsoleMain Body Environmental Conditions How to InstallInstallation Place How to Install 40mm or more 100mm or more Mounting Direction and SpacingFan Or more Oil/Water Protection Permissible Load to Output Shaft Stress to Cables Remarks How to ConnectConnect to CN Preparation Wiring to the Connector, CN X3 Pin RB1 6-pin, RB2 4-pin, RB3 5-pin System Configuration and WiringOverall Wiring Connecting Example of C-frame, 3-phase Connection to encoder Wiring to Connector, CNConnection to host controller Connection to external components Overall Wiring Connecting Example of E-frameConnection with input power supply Remarks Pin P, B1 and B2 Connection to motor driving phase and ground Cable Driver Filter Absorber For signal ContactorDriver and List of Applicable Peripheral Equipments Noise Surge Cable For signal contactorNoise Filter Connect pin 3 of the connector on the driver side with pin Wiring of the Main Circuit a to D-frameTips on Wiring Connect L1 and L1C, and L3 and L2C at single phase Case of Single Phase, 200V C and D-frame Wiring DiagramCase of Single Phase, 100V a and B-frame Case of Single Phase, 200V a and B-frame 24V DC power supply for brake Surge absorber Fuse 5A Wiring of the Main Circuit E and F-frame Using Screw Driver Case of 3-Phase, 200V E and F-frameWiring method to connector a to D-frame Using Handle Lever Msmd 50W to 750W MAMA100W to 750W MQMA100W to 400W Wiring to the Connector, CN X6 Connection to Encoder Msmd 50W to 750W Mama 100W to 750W MQMA100W to 400W Remark Wiring to the Connector, CN X7 Connection to External ScaleWiring to the External Scale, Connector, CN Application Connector Content PinNo Part name Specifications of the Connector, CNFor detailed information, refer to P.42 to Manufacturer 12 to Wiring for Connector CN Output Circuit Interface CircuitInput Circuit Function List of Signal for Connector CNCommon input signals Application Code Description Emergency stop input must be installed before usingEx When SV.Pr57 = 3 6 bits is set Point No P32INP16INP8IN Output signal pulse train and function Common output signals and their functions Not-synchronized OthersSynchronized Initial Status of the Front Panel Display 7-Segment LED Setup with the Front PanelComposition of Touch Panel and Display SV.Pr08 Output Signals Analog and Their FunctionsApplication Code Function Built-in Holding Brake Connecting ExampleOutput Timing of BRK-OFF Signal 12 to 24V V DC COM Power supply Fuse For brake Voltage Specifications of Built-in Holding BrakeEngaging Releasing Series Output Torque X10-4 Time Dynamic Brake Sequence at main Driving condition Power-off SV.Pr67After stalling Setup value of SV.Pr67 Contents of deviation counter Clear Hold After stalling Contents of deviation counter Hold Memo Outline of Panaterm 103 How to Connect SettingOutline of Setup Support Software, Panaterm Auto-Gain Tuning Mode Outline of Parameter Parameter SetupHow to Set How to Connect Bit positioning parameter This document, following symbols represent each modeComposition of Parameters Servo parameter Parameters for Functional Selection Power -ONFunction/Content PrNo Range List of Servo Parameter Baud rate Setup value Function/Content PrNoUnit Function/Content PrNo Setup value Signal of IM Set the second loop gain for position control Title Setup Unit Function/Content PrNoSetup value Instantaneous speed observer setup Caused by distortion resonance Velocity feed Inertia ratio Parameters for Auto-Gain TuningServo Title Setup Unit Function/Content PrNo Range Unit Function/Content PrNo Range Rotational direction Title Setup Unit Function/Content PrNo RangeVarying degree Auto-gain tuning Load inertia in motion Setup value Content Gain switching condition Parameters for Adjustment 2nd Gain Switching FunctionFilter mode Setup value Gain selection/switching Parameters for Position Control Servo Title Setup Function/Content PrNo Numerator SV.Pr44 Output pulse ratio 10000 Pulse output resolution=SV.Pr46 Phase logic Output source Servo Title Time constant Parameters for Input SignalsTitle Setup Function/Content PrNo Range Smoothing filter You can set the time constant Point specifying Input logic setting Parameters for Sequence Parameters for Velocity and Torque Limit After stalling Content Action of main power low voltage protectionSetup Action Deviation counter Value Setup time, or time lapse till Sequence at You can set up Servo-OFFAction delay time tb of the brake After setting up SV.Pr6a = tb Remarks Parameters for Protective functionExternal resistor but no Parameters for Full-Closed Control Parameters for Acceleration and Deceleration Unit Function/ContentList of 16-bit Positioning Parameters Parameters for Motor speed Parameters for Homing Title Setup Unit Function/Content Parameters for Jog operation CCW is a positive direction and CW is a negative direction Other ParametersDeceleration in jog Console display Step Title Setup range Unit Function/Content PrNoList of 32-bit Positioning Parameters List of Step Parameters Applicable motor Max. value Setup of Torque LimitModel No SV.Pr5E,5F When you want to obtain the max. motor torque When the motor torque is limited Composition of Display/Touch panel How to Use the ConsoleSetup with the Console Initial Status of the Console Display 7 Segment LED Mode Change Execution display Monitor ModeMode switch button Selection display Position control mode Full-closed control mode Display of Control ModeDisplay of I/O Signal Status Point Number Conversion Table Signal No. and its title Over-regeneration alarm Reference of Error Factor and HistoryAlarm Display Over-load alarm Display of Over-load Factor Display of Feedback Pulse Sum, Command Pulse SumSwitching of the Driver to be Communicated Display of Regenerative Load Factor Operation at Selection display Teaching ModeOverview of Teaching Mode Teaching Mode Setup Step parameter setting Target position setting Test Mode Step operation Homing Jog operation Structure of Parameter Setup Mode Parameter setup mode Step Parameter Bit Positioning Parameter How to Use the Console Digit next to the blinking decimal point can be modified Servo ParameterMovement to a high order position is limited per parameter Eeprom Writing Operation at Selection display Eeprom Write Mode Remarks Dont disconnect the console from the driver between Auto-Gain Tuning ModeNormal Mode Auto-Gain Tuning Screen Absolute encoder clear Auxiliary Function ModeAlarm Clear Alarm Clear Screen Then press to make a display to Alarm Clear Screen Clearing of Absolute Encoder 101 Copying Function Console Only 102 103 Install the Panaterm to Hard DiscProcedure of install Connecting cable DV0P1960 104 Procedure of log onLog on of the Panaterm Operation Settin g Overview of Operation Setting 107 Procedure DescriptionStep Operation Step Operation Operation mode Description Example of Incremental Operation SettingStep Operation Mode Wrap around Example of Absolute Operation SettingSetting of 16-bit positioning parameter Setting of step parameter Coordinate is set to Example of Rotary Axis Operation SettingSetting of 32-bit positioning parameter Control mode Servo off Example of Dwell Timer Operation SettingSetting of step data Jog Operation Jog Operation 16.Pr Description Set the parameters below when performing the jog operationParameters related to jog operation Homing Operation Homing Mode ListHoming is completed when the power supply turns on Homing Operation 115 116 Home Sensor + Z Phase based on the front endParameters related to this operation Positive direction Home sensor 117 Home Sensor based on the front endPositive direction 118 Home sensor + Z phase based on the rear endDirection of homing 119 120 Limit Sensor + Z phase 121 Limit SensorExample An operation in a positive direction Direction of homing Positive direction 122 Phase HomingBumping Homing Stopper etc 123 Data SetExample Direction of homing Home position = current position 124 Timing chartHoming Offset Operation Example of homing offset Homing offset is set to +5000 An operation stop in the deceleration time Emergency Stop Operation/Deceleration-and-Stop OperationPositioning completion output And-stop 126 Restart of operation Same procedure as a step operationTemporary Stop Operation Temporary Stop Operation Overview of Block Operation Continuous block operation procedure example16.Pr54 Description Block operation type setting Block Operation Combined Block Operation ST.Pr Operation mode Combined block operation procedure example Homing operation at sequential operation Sequential OperationSequential Operation Example of Operation Shaped % t2 = Shaped Acceleration/Deceleration FunctionExample of calculation 2500 p/r encoder Example Linear acceleration t2 = Strobe signal STB Timing ChartOperation Timing after Power-ON T1 *1 When an Error Alarm Has Occurred at Servo-ON CommandTo 5 ms Multi function input EX-IN1/EX-IN2 CN X5 Pin 22/25 When an Alarm Has Been Cleared at Servo-ON CommandAlarm Clear can be input in the two ways below Point input P1IN to P32IN CN X5 Pin 3, 4, 5, 6, 7 Brake release output Servo-ON/OFF Action While the Motor Is at Stall Servo-LockServo-ON/OFF Action While the Motor Is in Motion Servo-ON input Overview of Absolute System Configuration of Absolute SystemBattery for Backup Installation Absolute System Cycle/day Close the cover of the battery boxReference Cycles/day Normal homing Setup Initialization of Absolute EncoderWhen you make your own cable for 17-bit absolute encoder Installation Place 139 Clearing Absolute Encoder Using a consoleUsing the setup support software Panaterm 140 What Is Full-Closed Control ?Outline of Full-Closed Control Preparation for full-closed control 141 AdjustmentAdaptive Filter 147 Instantaneous Speed Observer 160 Damping Control 161 Ball screw Gain AdjustmentProcedures Purpose Explanation Type Applicable Range Real-Time Auto-Gain Tuning ModeHow to Operate Outline Writing to Eeprom Setup of parameter, Pr21Setup of parameter, Pr22 1st velocity loop gain Feed forward filter time constant Parameters Which Are Automatically SetSV.PrNo Title 1st position loop gain Velocity feed forward Invalidation of Adaptive Filter Adaptive Filter Too small or too big compared to the rotor inertia Normal Mode Auto-Gain TuningConditions which obstruct normal auto-gain tuning This function works under the following condition 90108135162 206251305377449 Auto-Gain Tuning ActionTable of auto-gain tuning Title Stiffness value By pressing How to Operate from the ConsoleAn arrow shows by pressing Changes toward the reversed direction SV.Pr2F 1st notch frequency Hz Invalidation of Real-Time Auto-Gain Tuning Waveform graphic function of the Panaterm Manual Gain Tuning BasicBefore Making a Manual Adjustment Analog monitor output SV.Pr Adjustment in Position Control ModeTitle of parameter Value How to adjust SV.Pr Title of parameter 154 Adjustment in Full-Closed Control ModeSetup of external scale ratio Setup of hybrid deviation excess Example Gain Switching FunctionYou want to increase the response by increas Ing the gain in motion 156 Setup of Gain Switching Condition Fig. C Fig.A Adaptive filter Suppression of Machine ResonanceAdaptive filter SV.Pr23, SV.Pr2F 1st and 2nd notch filter SV.Pr1D, 2E, 28, 29 and 2A 159 How to Check the Resonance Frequency of the MachineRelation of Gain Adjustment and Machine Stiffness Setup of instantaneous velocity observer SV.Pr27 Manual Gain Tuning ApplicationHow to Use Adjustment at normal position control SV.Pr24 Setup of damping filter 1st SV.Pr2C, 2nd SV.Pr2ESetup of damping filter switching selection Damping Control 162 163 When in Trouble Machine Motor Protective Function What is Error Code ?What to Check ? Host controller Protective Function Detail of Error Code 166 Protective Error Causes Measures FunctionOver-heat Over-load Cation Cation errorData error Communi Status error Error Causes Measures FunctionDown error Over error Recognition Error Protection Other error Limit errorID setting Scale auto Recognition Error pro Tection Motor auto Conditions under which the software limit works Time characteristics of Err16 Overload protectionSoftware Limit Function This function works under the following conditions When the load moves to the left at Servo-ON When no position command is entered Servo-ON statusWhen the load moves to the right at Servo-ON Causes Countermeasures TroubleshootingWiring Motor Does Not Run Motor Stops During an Operation Abnormal Motor Noise or Vibration InstallationPoint Deviates Positioning Accuracy is Poor Home Position Slips 174 Parameter Returns to Previous SetupCauses Countermeasures Wiring 175 SupplementConformity to EC Directives and UL Standards Permissible Load at Output Shaft/Motor with Gear Reducer Composition of Peripheral Equipments Conformity to EC Directives and UL Standards Option part No Power SupplyCircuit Breaker Noise Filter Surge Absorber Conformity to UL Standards Noise Filter for Signal LinesGround-Fault Breaker Grounding Pin disposition for motor/brake connector without brake Specifications of for Motor ConnectorPin disposition for encoder connector Pin disposition for motor/brake connector with brake Motor type Type of junction cable Table for junction cable by model of Minas A4P series Title Manufacturer Junction Cable for Encoder Junction Cable for Motor ROBO-TOP105˚C 600V DP Junction Cable for Brake ROBO-TOP105˚C 600V DP Junction Cable for Motor with Brake ROBO-TOP105˚C 600V DP Communication Cable for connection to PC Connector Kit for External Peripheral EquipmentsSetup Support Software Panaterm Interface Cable For DVOP2490, DV0P3480 Recommended manual crimp tool Connector Kit for Motor/Encoder Connection Mgma 2.0kW to 4.5kW 500W to 1.5kWMhma 2.0kW to 5.0kW Upper side Bottom side Mounting DimensionsMounting Bracket Part No. DV0P4420 Harmonic restraint Motor Power Rated Series Supply OutputReactor Options Motor Surge absorber for motor brake Recommended componentsSurge Absorber for Motor Brake List of Peripheral Equipments Reference only 192 Dimensions DriverMass 0.8kg 193 Mass 1.5kgMass 1.7kg 194 Mass 3.2kg Mama 100W to 750W Dimensions Motor 3h9 Motor output Motor model100W 5A * P1 5A * S1 01 * P1 01 * S1 Msmd 200W to 750W 126.5 Mqma 100W to 400W01 * P1 01 * S1 02 * P1 02 * S1 04 * S1 Msma 1.0kW to 2.0kW Msma 3.0kW to 5.0kW Mdma 1.0kW to 1.5kW 0kW 20 * P1 20 * S1 30 * P1 30 * S1 2500P/r Incremental Rotary encoder Specifications Without brake With brakeMdma 2.0kW to 3.0kW Mdma 4.0kW to 5.0kW 13.5 Mgma 900W to 2.0kW2500P/r Incremental 17-bit Absolute/Incremental 207 Mgma 3.0kW to 4.5kW 04 * P1 04 * S1 15 * P1 15 * S1 2500P/r Incremental Mfma 400W to 1.5kW Without brake 139 Mfma 2.5kW to 4.5kWMotor output 5kW Motor model 25 * P1 500W 0kW 5kW 05 * P1 05 * S1 10 * P1 10 * S1 15 * P1 15 * S1 Mhma 500W to 1.5kW Mhma 2.0kW to 5.0kW Series Radial thrust Direction Motor At assembly During running Motor output Thrust loadPermissible Load at Output Shaft Radial load P direction Thrust load a and B direction Without oil seal MAMA012 MAMA022 With and without oil seal MQMA011 MQMA012MQMA021 MQMA022 MQMA041 MQMA042 MSMD012 Motor Characteristics S-T CharacteristicsWithout oil seal With oil seal MSMD5AZ MSMD011 MSMD042 Without oil seal With oil seal MSMD021MSMD022 MSMD041 MSMA402 MSMA102 MSMA152MSMA202 MSMA302 MFMA252 MFMA452 With oil seal MDMA302 MDMA402MDMA502 With oil seal MFMA042 MFMA152 MHMA502 MHMA052 MHMA102MHMA152 MHMA202 MHMA302 MHMA402 Combination of Driver and Motor with Gear Reducer Absolute/Incremental specifications, 17bitMotor with Gear Reducer Model No. of Motor with Gear Reduce Without brake With brake Dimensions/Motor with Gear ReducerMotor with Gear Reducer Brake 220 Remarks on installationPermissible load at shaft Motor output Radial thrust LR/2 MSMD021 * * 1N MSMD021 * * 2N Supply Reduction RatioTo driver Output MSMD011 * * 1N MSMD011 * * 2N 100W Gate drive Block Diagram of Driver 223 Internal Block Diagram of MINAS-A4P Driver E and F-frame + + Block Diagram by Control ModePosition Control Mode When Pr02 Setup of control mode is 225 Full-closed Control Mode Specifications Driver Function Software error Setting range Number of pointsUnnecessary wiring Encoder feedback pulse Protection Hardware error Servo parameter SV.Pr Default Parameters for all the models of A4P Series 229 Bit positioning parameter 16.PrBit positioning parameter 32.Pr 230 231 Date Model No Purchase Dealer Tel After-Sale Service RepairRepair Technical information