Panasonic A4P Series instruction manual Before Using the Products

Failure to observe this in- struction could result in electrical shocks.

Failure to observe this instruc- tion could result in electrical shocks, injuries and fire.

[Before Using the Products]

DANGER

Before Using the Products

Do not place combustibles near by the motor, driver and regenera- tive resistor.

Failure to observe this in- struction could result in fire.

Do not place the console close to a heating unit such as a heater or a large wire wound resistor.￿

Failure to observe this in- struction could result in fire and breakdowns.

Ground the earth terminal of the motor and driver without fail.

Failure to observe this in- struction could result in electrical shocks.

Install an overcurrent protection, earth leakage breaker, over-tem- perature protection and emergen- cy stop apparatus without fail.￿￿

￿

Install an emergency stop circuit externally so that you can stop the operation and shut off the power immediately.￿￿

￿	Failure to observe this instruction could
	result in injuries, electrical shocks, fire,
	breakdowns and damages.

Install and mount the Product and machinery securely to prevent any possible fire or accidents in- curred by earthquake.

Failure to observe this instruc- tion could result in electrical shocks, injuries and fire.

Turn off the power and wait for a longer time than the specified time, before transporting, wiring and inspecting the driver.

Failure to observe this in- struction could result in electrical shocks.

Turn off the power and make it sure that there is no risk of elec- trical shocks before transporting, wiring and inspecting the motor.￿￿

￿

Check and confirm the safety of the operation after the earthquake.

Failure to observe this instruc- tion could result in electrical shocks, injuries and fire.

Mount the motor, driver and re- generative resistor on incombust- ible material such as metal.￿

Failure to observe this in- struction could result in fire.

Wiring has to be carried out by the qualified and authorized specialist.

Failure to observe this in- struction could result in electrical shocks.

Make the correct phase sequence of the motor and correct wiring of the encoder.

Failure to observe this instruction could result in injuries breakdowns and damages.

9