Panasonic A4P Series How to Install, Installation Place, Environmental Conditions

How to Install

Install the driver and the motor properly to avoid a breakdown or an accident.

Driver

Installation Place

1)Indoors, where the products are not subjected to rain or direct sun beams. The products are not water- proof.

2)Where the products are not subjected to corrosive atmospheres such as hydrogen sulfide, sulfurous acid, chlorine, ammonia, chloric gas, sulfuric gas, acid, alkaline and salt and so on, and are free from splash of inflammable gas, grinding oil, oil mist, iron powder or chips and etc.

3)Well-ventilated and low humidity and dust-free place.

4)Vibration-free place

Environmental Conditions

Item￿	Condition￿
Ambient temperature￿	0˚C to 55˚C (free from freezing)￿
Ambient humidity￿	Less than 90% RH (free from condensation)￿
Storage temperature￿	–20˚C to 80˚C (free from freezing)￿
Storage humidity￿	Less than 90% RH (free from condensation)￿
Vibration￿	Lower than 5.9m/S2 (0.6G), 10 to 60Hz￿
Altitude	Lower than 1000m

How to Install

1)Rack-mount type. Install in vertical position, and reserve enough space around the servo driver for ventilation. Base mount type (rear mount) is standard (A to D-frame)

2)Use the optional mounting bracket when you want to change the mounting face.

A to D-frame

MADD￿

MBDD￿

MCDD￿

MDDD

e.g.) In case of C-frame

Mounting bracket (optional parts)

Fastening torque of earth screws (M4) to be 0.39 to 0.59N•m.

E and F-frame

Mounting bracket

22