Panasonic A4P Series instruction manual Jog operation, Homing

How to Use the Console

• Jog operation

The motor can be operated by the jog operation.

Press .

...A current position is shown during an operation.

When you keep on pressing , the motor rotates continuously in a positive direction while pressing it. When you keep on pressing , the motor rotates continuously in a negative direction while pressing it. The rotation speed can be set by 16.Pr40 (jog speed [low]).￿

When you press during rotation, the rotation speed changes to a jog speed (low).

￿

When you keep on pressing + , the motor rotates continuously in a positive direction while pressing it. When you keep on pressing + , the motor rotates continuously in a negative direction while pressing it. The rotation speed can be set by 16.Pr41 (jog speed [high]).￿

When you press during rotation, the rotation speed changes to a jog speed (high).

*Definition of positive or negative direction of rotation depends on the setting of 16.Pr50 ￿ (operating direction setting).￿

*If “Error” is shown, it may be caused by any of the factors below.￿

•The servo turns off.￿

•Operation by I/O etc.

• Homing

Homing is performed as follows.

Press .

Press .

Homing

Keep on pressing .￿

A dot ( ) moves to the left.

Error occurred

An error occurs if any parameter related to￿ homing is not set.

Movement completed.

To move to the next process, press .

90