Panasonic WJ-SX150A manual Terminal Mode Descriptions, Log-in/Log-out, Operator Registration

TERMINAL MODE DESCRIPTIONS

In the terminal mode, each external device (such as a cam- era, monitor, system controller, or a recorder, etc.) has the name and number (Camera 1, etc.). When you control a device, you are to select the device number and execute the selection. For example, before controlling Camera 1, you will press the numeric button 1, and then press the CAM (SET) button. Each operator has a level and priority. When you try to control a device beyond the level and priority, the PRO- HIBITED or BUSY indicator will light up to inform you that you cannot control it.

■Log-in/Log-out

Before starting the system operation, it is necessary to input an operator ID and a password from a system controller.

The system identifies the operator ID and password by com- paring the registered data. If the ID and password are cor- rect, the system will enter the operation mode.

This identification is called log-in. On the contrary, the termi- nation of the system operation is called log-out.

The following are the properties, which can prevent the oper- ation conflict.

Level Setting

16 operators are classified in the level from 1 (the highest) to 3 (the lowest).

A higher-level operator can control more functions.

Password Setting

Up to 5 digit numbers can be registered as a password. When an operator logs in, the system identifies the operator ID and password by comparing the registered data.

If they are correct, the operator can control the system.

Priority Setting

The system classifies the operators in priority from 1 to 16. This setting includes the control coverage that is configured by level, and the priority in case of the conflict with the same- level operator.

Operable Cameras and Sequences

Log-in/log-out has two ways: One is the manual log-in/log-out and the other is auto log-in/out.

Through the auto log-in, an operator can login the system without entering a password, after turning the power on. Through the auto log-out, an operator can logout of the sys- tem when not operating the system for a fixed time.

The way of log-in/log-out and the time for auto log-out is con- figurable when setting up the system.

When configuring the auto log-in, it is necessary to assign an operator ID to each data port.

●Operator Registration

When operating the system, the operator registration is nec- essary.

Up to 16 operators can be registered and filed by their oper- ator IDs.

They are registered in SETUP MENU and WJ-SX150A Administrator Console.

•Description of Operator Registration

This setting assigns each operator the cameras and sequences operable by the level.

Notes:

•Each operator’s ID, password, level and priority need to be configured in SETUP MENU and WJ-SX150A Administrator Console.

•Auto log-in/log-out is configurable in WJ-SX150A Administrator Console.

•The level and priority are assigned to each operator. Operators cannot control the system beyond the assign- ment.

Even within the level and priority, a device controlled by a higher-level operator is not operable.

•Manual log-in/log-out or auto log-in/log-out is assignable to the system controllers Terminal – K1 to K4.

							• • •
Operator 1		Operator 2	Operator 3	Operator 4	Operator 5	Operator 6	Operator n* (Max 16)
ID	150	1	100	101	102	103	–
Password	150	12345	100	101	102	103	–
Level	1	1	1	1	2	3	–
Priority	1	2	3	4	5	6	–
Camera Operation	1	1	1	1	1	1	–

*n is a number.

Level Table
SX150A Setup	Items operable by
Camera Setup
Program Preset Position	the level are set to
Camera Control	ON.
Camera Selection
Recorder Setup
Recorder Control

Camera Operation Level

1:This level can select and control the camera.

2:This level can only select the camera.

3:This level can neither select nor control the camera.

14