bed_anl_DIGITY CI_Quark3_en.qxd 31.01.03 16:47 Seite 27
>Use the green function key to select the function Parental Control.
A key symbol will be displayed next to the selected programme.
>Repeat this procedure until you have blocked access to all the programmes you wish to mark in this way.
>When you have completed configuring the programme list according to your preferences, press the Back key twice to return to normal operation.
>To activate the parental control function, you must now enter your personal PIN code in the Point Changing PIN, you must then activate the parental control function as described in Point 5.2 (Basic Settings).
7.2 Changing the PIN
The Pin code is set at the factory (default value) to 0000. In order to activate the parental control feature, you must input your own personal PIN code instead of the default setting.
Note! Be sure not to forget your PIN code. If this should happen, consult your specialist retailer! To change the PIN code proceed as follows:
>Press the Menu key to display the Main Menu.
>Use the arrow keys up/down to mark the item
Settings. | (Fig. |
>Confirm by pressing OK.
The
>Use the arrow keys up/down to mark the item Change Unit PIN.
>Confirm by pressing OK. The menu Change Unit PIN will be displayed. (Fig.
>Now use the numeric keys to enter the current PIN code (default setting 0000).
>Use the numeric keys to enter the new PIN code you have chosen.
>Repeat entry of the new code.
>You have completed changing the PIN code. Press Back twice to return to normal operation.
Please note that you must still activate the parental control function as described under Point 7.3.
7.3Unblocking access control for individual programmes
To delete the parental control function for individual programmes, proceed as described under Point 7.1.5. Press the blue function key (Change), then enter the appropriate PIN code. Select the programme you wish to unblock, and remove the access control by pressing the green function key (Parental Control).
27