TechniSat DIGITY CI Operating Manual 6.13 Video text

inadvertent interruption of the recording.

Timer operation is indicated by blinking of the control

LED on the display.

Preselect

Your receiver switches itself on at the set time, and

selects the appropriate channel. In contrast to the

VCR setting, all functions of the remote control remain

active, and the unit does not switch off at the end of

the recording.

Note!!!

Please ensure that the information box shows the correct

time. If this is not the case, switch your receiver to ZDF or

any other channel providing standard clock time for at least

30 seconds, to allow the unit to synchronize with the correct

time.

6.13 Video text

6.13.1 Using the video text decoder of your

television set

Where available from the provider, video text will be available

on your TV set. To operate the video text function use the

remote control of your television set. Should you experience

any problems with your television set, such as graphics and

text being superimposed, switch your receiver to FBAS

mode (Point 5.3).

6.13.2 Using the internal video text decoder

If your television set is not equipped with an integrated video

text decoder, you can still receive video text, where broadcast

by the provider, through your receiver.

> Select the programme on which you wish to view

video text information.

> Press the red function key to switch on video text.

(Fig. 6-14)

> Use the numeric keys to enter the video text page

you wish to view. Your input will be displayed in the

upper left corner of the screen.

When you have entered the desired page number, the

receiver will search for the selected page. As not all

pages can be transmitted simultaneously, it may take

a few seconds before your receiver finds the page and

displays it on the TV screen.

All video text providers use page 100 for their

index/list of contents.

> Press the red resp. green function keys to move

forward resp. backward in the text one page at a time.

> Press the Back key to return to normal operation.

23

(Fig. 6-14)

bed_anl_DIGITY CI_Quark3_en.qxd 31.01.03 16:47 Seite 23

Contents

Main Operating Manual DDIIGGIITTYY CCII 1 Contents Page 2 Illustrations Remote control Front panel Rear panel 3 Please read this first Important operating information Environmental note: Safety Note: When not in operation: Connecting the DVB receiver to a satellite installation VCRAnalogue Receiver 4 Connections 4.1 Mains power connection 4.2 External unit 4.2.1 Single unit operation 4.2.2 Operating an additional receiver in a single- receiver installation 5 Installation 5.1 OSD language 5.2 Basic settings (Fig. 5-2) (Fig. 5-3) 5.3 Audio/Video settings (Fig. 5-4) (Fig. 5-5) 5.3.1 Image format TV set: 5.3.2 Language (Audio signal) 5.4 LNB setting/Adjusting to external unit/Satellite selection 5-6) (Fig. 5-7) (Fig. 5-8) 5.4.1 Switching DiSEqC on and off 5.4.2 Setting the switching matrix and the LNB characteristics 5.4.3 Additional Settings (Fig. 5-9) 5.4.4 Rotating antenna 6 Operation 6.1 Switching on and off 6.2 Programme selection 6.2.1 Using the Programme keys up/down 6.2.2 Using the numeric keys 6.2.3 Using the programme list (Fig. 6-1) 6.2.3.1 Selecting a list (Fig. 6-2) (Fig. 6-3) 6.3 Volume control 6.4 Reception of encrypted programmes 6.4.1 Multifeed options (Fig. 6-5) (Fig. 6-8) 6.5 Selecting a different language 6.6 Switching between TV and Radio 6.7 Return to previous programme 6.8 Display clock and programme information 6.9 Additional programme information 6.10 Transponder Information (Fig. 6-9) (Fig. 6-10) 6.11 Electronic Programme Guide 6.11.1 Calling up the Electronic Programme Guide 6.12 Timer 6.12.1 Programming via EPG: (Fig. 6-11) 6.12.2 Manual programming/Changing timer set- tings (Fig. 6-12) Page 6.13 Video text 6.13.1 Using the video text decoder of your television set 6.13.2 Using the internal video text decoder (Fig. 6-14) 7 Changing basic programming 7.1 Configuring the programme list (Fig. 7-3) 7.1.1 Calling up the programme list 7-1) 7.1.3 Deleting programmes 7.1.3.1 Deleting from the Favourites list 7.1.3.2 Deleting from the Total list 7.1.4 Sorting programmes (Fig. 7-5). 7.1.5 Blocking access to programmes (parental control) 7.2 Changing the PIN (Fig. 7-6) 7.3 Unblocking access control for individual programmes 7.4 Programme Search (Fig. 7-7) (Fig. 7-8) 7.4.1 Satellite (Fig. 7-9) 7.4.2 Transponder (Fig. 7-10) 7.4.3 Manual search (Fig. 7-11) 7.4.4 Integrating programmes after a search (Fig. 7-12) 7.5 Restoring basic programming/ Delete all (Fig. 7-13) (Fig. 7-14) 7.5.1 Activating default setting 7.5.2 Delete all programmes 7.5.3 Updating software (Fig. 7-15) 7.6 System configuration 7.7 Encryption system (Fig. 8-3) (Fig. 8-1) and switch the 8 Operation in conjunction with a rotary antenna (Fig. 8-2) 8.1.2 Setting Eastern limit 8.1.3 Setting Western limit 8.2 Geo-positioning (Fig. 8- 9) 8.3 Setting the satellite position 8.3.1 Selecting satellite positions 8.3.1.1 Selecting a pre-programmed satellite position (Fig. 8-10) 8.3.1.2 Setting user-defined satellite positions (User Satellite) (Fig. 8-11) 8.3.2 Adjusting the satellite antenna 8.3.2.1 Test-Transponder/LNB-configuration (Fig 8-12) 8.3.2.2 Antenna manual adjustment 8.3.2.3 Automatic fine adjustment (Autofocus) 8.3.3 Saving satellite positions (Fig. 8-14) (Fig. 8-15) (Figs. 8- 16 and 8-17) 8.4 List of current satellites 8.5 Deleting a satellite position 8.6 Reference position 9 Technical Terms Page Page 10 Technical data Page 11 Trouble-shooting guide ? Problem Possible cause Solution 12 Annexure Co-ordinates of selected German cities (1) Co-ordinates of selected German cities (2) Co-ordinates of selected German cities (3) For everyday use Switching on and off Programme selection Using the programme keys up/down Using the numeric keys