TechniSat DIGITY CI Operating Manual manual Manual search, Integrating programmes after a search

Models: DIGITY CI Operating Manual

1 50
Download 50 pages 7.35 Kb
Page 30
Image 30

bed_anl_DIGITY CI_Quark3_en.qxd 31.01.03 16:47 Seite 30

(Fig. 7-11)

(Fig. 7-12)

Polarisation

>Use the arrow keys up/down to mark the item

Polarisation.

>Use the OK key to enter the polarisation plane (horizontal or vertical) on which the desired programme is broadcast.

>Press the green function key to decide whether you wish to search only for free-to-air programmes (Free programmes) or whether you wish to include encryp- ted programmes (All programmes) in the search.

>Press the red function key (Start search) to commence the search..

The search will be started. Please note any information displayed on your screen.

>The search procedure can be stopped by again pressing the red function key.

7.4.3 Manual search

If you are unable to find a programme using the search methods as described under Points 7.4.1 and 7.4.2, it may be necessary to enter additional unique. and programme-specific PID numbers. These numbers can be found in the Internet, or you can contact the respective programme providers for this information.

To perform a manual search, call up the menu Search Manual Search. (Fig. 7-11)

>Use the arrow keys up/down to select the menu item

Manual Search.

>Confirm by pressing OK.

The menu >Search>Manual Search will be

displayed.

The menu differs from the menu Transponder only with respect to the menu items PCR PID, Audio PID and Video PID.

>Proceed as described under Point 7.4.3.

>Use the arrow keys up/down to mark the lines PCR PID, Audio PID and Video PID, then use the numeric keys to enter the corresponding numbers.

7.4.4 Integrating programmes after a search

As the search of one or more transponders progresses, you can follow this on the screen. When the search has been completed, the number of transponders found, will be display- ed. In addition, you will be asked by the display (Fig. 7-12)whether you wish to integrate the programmes found automa- tically in the TV or radio programme lists. If you wish to incor- porate the programmes automatically, you can decide whether they should be added to the Favourites list in sor- ted or unsorted order.

30

Page 30
Image 30
TechniSat DIGITY CI Operating Manual manual Manual search, Integrating programmes after a search