TechniSat DIGITY CI Operating Manual manual Installation, Hi-fi amplifier, Serial interface RS

bed_anl_DIGITY CI_Quark3_en.qxd 31.01.03 16:47 Seite 10

If your video recorder does not provide an electric signal, use the EXTERN key to switch your receiver to the external VCR input. Pressing this key again will revert to normal operation.

4.5 Hi-fi amplifier

To achieve the best sound quality, the receiver can be connected to a hi-fi amplifier. To do this, connect the Audio

Rand Audio L cinch sockets of the receiver with a suitable input of your hi-fi amplifier, e.g. CD or AUX, using a suitable cable. Note that the Phono imput is not suitable!.

4.6 Serial interface RS 232

The RS 232 interface serves to update the operating software, and to facilitate pre-programming by means of a PC.

5 Installation

Once you have connected your receiver, and have commenced operation, you can proceed to optimize the settings for your personal preferences, if you wish.

5.1 OSD language

This feature gives you the opportunity to set the menu language in accordance with your preferences.

To change the OSD language, proceed as follows:

> Press the Menu key to display the Main Menu (Fig. 5-1).

> Now use the arrow keys up/down to select the menu item OSD language.

> Confirm by pressing OK.

(Fig. 5-1)

The sub-menu OSD language will be displayed.

>Use the arrow up/down keys to select the desired language. Use the arrow up/down keys to move the marker up or down one line at a time, use the arrow keys left/right to move forward or back one page at a time.

>Store your selection in memory by pressing OK.

>Press the Back key to return to the Main Menu.

5.2 Basic settings

In order to gain optimum enjoyment from your DVB receiver, you may still have to adjust some settings to your individual preferences.

>Press the Menu key to display the Main Menu.

>Use the arrow keys up/down to select the line Settings.

10