bed_anl_DIGITY CI_Quark3_en.qxd 31.01.03 16:47 Seite 22
Channel
In this line, select the television channel/station on which you wish to record a programme:
>If necessary, use the arrow keys to mark the Channel.
>Press OK. A programme list will be displayed.
>Use the arrow keys to mark the desired programme.
>Confirm by pressing OK.
The selected programme will now be accepted into the timer menu.
Date
>Use the arrow keys to mark the item Date.
>Use the numeric keys to enter the recording date.
Start
>Use the arrow key right to select the item Start.
>In this line use the numeric keys to enter the starting time.
Stop
>Repeat the steps as described under “Start” to enter the stop time, or end of programme.
So that all events can be included, there should be an interval of at least one minute between the stop time of a timer event and the starting time of the next timer event!
Repeat (optional)
>Use the arrow key right to mark the item Rep.
>Press OK.
A selection window will be displayed, offering various repeating suggestions.
1x Timer on
D Daily repeat
1xW Repeat once a week
>Use the arrow keys up/down to select the desired function.
>Press OK to accept the setting into memory.
>When you have completed the programming, press the yellow function key (Accept) to accept and store the data in memory.
>Press the TV/Radio key to return to normal operation.
Type
>Use the arrow key right to mark the item Type.
>Use the OK key to enter the required type in this line.
VCR
Your receiver will be switched on resp. off for the selected programme. If the receiver is switched on by means of the timer, most of the functions of the remote control are disabled, as a safety precaution to prevent
22
