4: Configuration
Deleting All Configured Printers
The auto discovery utility of xPrintServer is enabled by default so that whenever you turn on your xPrintServer device, auto discovery will automatically run one time. Utilize these instructions to access the area where you may disable or
1.Login to the xPrintServer user interface (see Logging In).
2.Click the Printer tab to access the Printers > List page.
3.Click the Discovery link to the left of the page to reach the Printer Discovery page.
4.Click the Remove all printers button to remove all configured printers, as desired.
5.Click Yes in the confirmation popup that appears.
6.
Setting Real Time Clock
Real Time Clock is a
To modify the Time-zone
1.Login to the xPrintServer user interface (see Logging In).
2.Click the Admin tab to access the Admin page.
3.Click the
4.Select a new time zone from the Select
5.Click the Change
6.Click Yes in the confirmation popup that appears.
7.Wait for the xPrintServer to reboot. When the time zone is changed, the xPrintServer device will automatically restart, bringing you back to System Status on the Home Page. The unit is now set to your new chosen time zone.
Assigning a Static IP Address to the xPrintServer
Your xPrintServer IP address is DHCP by default, but can be configured with a static IP address. Utilize these instructions to establish a static IP address.
1.Login to the xPrintServer user interface (see Logging In).
2.Click the Admin tab to access the Admin >
3.Select IP Address to access the Admin > IP Address page.
4.Click the Static radio button near the top of the page to access static IP address configuration fields.
5.Complete the following fields: IP Address
xPrintServer User Guide | 30 |
