INITIAL SETUP
Clear
Software Version: This item is informational only.
Reset Settings: Select to clear all user settings and return the BDP 1 to its factory defaults.
When you have finished, use the ⁄/¤/‹ / › Buttons to navigate to another Setup menu, or press the Setup or Clear Button to clear the menus from view.
Step Seven – Network Setup
This menu allows you to control Internet access from the
BD-Live Web Access: The default is to always allow the BDP 1
to access the Internet when the
A USB drive with at least 1GB capacity is required for
Select the Test Connectivity line. If the test runs successfully, leave the other settings as is;
If the BDP 1 is not able to access the Internet, you may have to manually change some of the settings. Navigate to the IP Mode line and select “Manual”. A popup screen will appear with the current network settings. Contact your Internet service provider for the information required and change the settings accordingly. Highlight the setting and press the
OK Button. A dialog box will appear, prompting you for the new Internet address. Use the Numeric Keys to enter each field of the address. If the address contains three digits, the cursor will automatically advance to the next field. When fewer than three digits are used, press the › Button to advance the cursor. Press the ‹ Button to return to a previous field if corrections are required. When the complete address has been entered, press the › Button to finish the entry.
If you have installed a router to create a home network, consult the instructions or Web site for the router to obtain the information.
This completes the setup process. Press the Setup Button to clear the
Setup menus from the screen.
19