HP Manager Software manual Defaults None Access All, WX1200# display ap counters

280CHAPTER 9: MANAGED ACCESS POINT COMMANDS

„set {ap dap} group on page 313

„set {ap dap} name on page 315

„set {ap dap} upgrade-firmwareon page 328

„set {ap dap} radio mode on page 323

„set {ap dap} radio antennatype on page 315

„set {ap dap} radio channel on page 320

„set {ap dap} radio radio-profileon page 324

„set {ap dap} radio tx-poweron page 325

display {ap dap} Displays MAP access point and radio statistics counters. counters

Syntax — display ap counters [port-list[radio {1 2}]]

Syntax — display dap counters [dap-num[radio {1 2}]]

„port-list— List of ports connected to the MAP access point(s) for which to display statistics counters.

„dap-num— Number of a Distributed MAP for which to display statistics counters.

„radio 1 — Shows statistics counters for radio 1.

„radio 2 — Shows statistics counters for radio 2. (This option does not apply to single-radio models.)

Defaults — None.

Access — All.

History —Introduced in MSS Version 3.0.

Usage — To display statistics counters and other information for individual user sessions, use the display sessions network command.

Examples — The following command shows statistics counters for an

MAP access point on port 6:

WX1200# display ap counters 6
Port: 6	radio: 1
=================================		PktTxCount	91594255
LastPktXferRate	2