HP Manager Software manual Copy, „ reset system on, Performs the following copy operations

542CHAPTER 18: FILE MANAGEMENT COMMANDS

	See Also
	„ display config on page 548
	„ reset system on page 554
copy	Performs the following copy operations:
	„ Copies a file from a TFTP server to nonvolatile storage.
	„ Copies a file from nonvolatile storage or temporary storage to a TFTP
	server.
	„ Copies a file from one area in nonvolatile storage to another.
	„ Copies a file to a new filename in nonvolatile storage.

Syntax — copy source-url destination-url

„source-url— Name and location of the file to copy. The uniform resource locator (URL) can be one of the following:

„[subdirname/]filename

„file:[subdirname/]filename

„tftp://ip-addr/[subdirname/]filename

„tmp:filename

For the filename, specify between 1 and 128 alphanumeric characters, with no spaces. Enter the IP address in dotted decimal notation.

The subdirname/ option specifies a subdirectory.

„destination-url— Name of the copy and the location where to place the copy. The URL can be one of the following:

„[subdirname/]filename

„file:[subdirname/]filename

„tftp://ip-addr/[subdirname/]filename

If you are copying a system image file into nonvolatile storage, the filename must include the boot partition name. You can specify one of the following:

„boot0:/filename

„boot1:/filename

Defaults — None.

Access — Enabled.