HP Manager Software manual Snoop Commands

20 SNOOP COMMANDS

Use snoop commands to monitor wireless traffic, by using a Distributed MAP as a sniffing device. The MAP copies the sniffed 802.11 packets and sends the copies to an observer, which is typically a protocol analyzer such as Ethereal or Tethereal.

(For more information, including setup instructions for the monitoring station, see the “Remotely Monitoring Traffic” section in the “Troubleshooting an WX Switch” chapter of the Wireless LAN Switch Configuration Guide.)

This chapter presents snoop commands alphabetically. Use the following table to locate commands in this chapter based on their use.

Table 107 Snoop Commands by Usage

Remote monitoring	set snoop on page 571
(snooping)
	display snoop info on page 577
	clear snoop on page 570
	set snoop map on page 574
	display snoop map on page 577
	display snoop on page 576
	clear snoop map on page 570
	set snoop mode on page 575
	display snoop stats on page 578