HP Manager Software manual Set interface

set interface 143

	See Also
	„ set arp on page 141
	„ telnet on page 195
set interface	Configures an IP interface on a VLAN.
	Syntax — set interface vlan-idip
	{ip-addr mask ip-addr/mask-length}
	„ vlan-id— VLAN name or number.
	„ ip-addr mask — IP address and subnet mask in dotted decimal
	notation (for example, 10.10.10.10 255.255.255.0).
	„ ip-addr/mask-length— IP address and subnet mask length in CIDR
	format (for example, 10.10.10.10/24).
	Defaults — None.
	Access — Enabled.
	History— Introduced in MSS Version 3.0.
	Usage — You can assign one IP interface to each VLAN.

If an interface is already configured on the VLAN you specify, this command replaces the interface. If you replace an interface that is in use as the system IP address, replacing the interface can interfere with system tasks that use the system IP address, including the following:

„Mobility domain operations

„Topology reporting for dual-homed MAP access points

„Default source IP address used in unsolicited communications such as AAA accounting reports and SNMP traps

Examples — The following command configures IP interface 10.10.10.10/24 on VLAN default:

WX1200# set interface default ip 10.10.10.10/24

success: set ip address 10.10.10.10 netmask 255.255.255.0 on vlan default