HP Manager Software manual Wep key-index

set service-profile wep key-index 369

set service-profile	Sets the value of one of four static Wired-Equivalent Privacy (WEP) keys
wep key-index	for static WEP encryption.
	Syntax — set service-profile name wep key-index num key value
	„ name — Service profile name.
	„ key-indexnum — WEP key index. You can enter a value from 1
	through 4.
	„ key value — Hexadecimal value of the key. You can enter a
	10-character ASCII string representing a 5-digit hexadecimal number
	or a 26-character ASCII string representing a 13-digit hexadecimal
	number. You can use numbers or letters. ASCII characters in the
	following ranges are supported:
	„	0 to 9
	„	A to F
	„	a to f

Defaults — By default, no static WEP keys are defined.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Usage — MSS automatically enables static WEP when you define a WEP key. MSS continues to support dynamic WEP.

If you plan to use static WEP, do not map more than 8 service profiles that contain static WEP keys to the same radio profile.

Examples — The following command configures WEP key index 1 for service profile sp2 to aabbccddee:

WX4400# set service-profile sp2 wep key-index 1 key aabbccddee

success: change accepted.

See Also

„set service-profile wep active-multicast- index on page 367

„set service-profile wep active-unicast- index on page 368