HP Manager Software manual Set rf detect, Countermeasures Mac Set rfdetect ignore

530CHAPTER 17: RF DETECTION COMMANDS

	Examples — The following command adds client MAC address
	11:22:33:44:55:66 to the black list:
	WX-8# set rfdetect black-list 11:22:33:44:55:66
	success: MAC 11:22:33:44:55:66 is now blacklisted.
	See Also
	„ set rfdetect black-liston page 529
	„ display rfdetect black-liston page 535
set rf detect	Deprecated in MSS Version 4.0. You now can disable or reenable active
countermeasures	scan in individual radio profiles. See set radio-profile countermeasures
	on page 337.
set rfdetect	Deprecated in MSS Version 4.0.
countermeasures
mac
set rfdetect ignore	Configures a list of known devices to ignore during an RF scan. MSS does
	not generate log messages or traps for the devices in the ignore list.
	Syntax — set rfdetect ignore mac-addr
	„ mac-addr— BSSID (MAC address) of the device to ignore.
	Defaults — MSS reports all unknown BSSIDs detected during an RF scan.
	Access — Enabled.
	History —Introduced in MSS Version 3.0.
	Usage — Use this command to identify third-party APs and other devices
	you are already aware of and do not want MSS to report following RF
	scans.
	If you try to initiate countermeasures against a device on the ignore list,
	the ignore list takes precedence and MSS does not issue the
	countermeasures. Countermeasures apply only to rogue devices.