HP Manager Software manual Set enablepass

set enablepass 35

set enablepass	Sets the password that provides enabled access (for configuration and
	monitoring) to the WX switch.
	Syntax — set enablepass
	Defaults — None.
	Access — Enabled.
	History — Introduced in MSS Version 3.0.
	Usage — After typing the set enablepass command, press Enter. If you
	are entering the first enable password on this WX switch, press Enter at
	the Enter old password prompt. Otherwise, type the old password.
	Then type a password of up to 32 alphanumeric characters with no
	spaces, and reenter it at the Retype new password prompt.
	CAUTION: Be sure to use a password that you will remember. If you lose
	the enable password, the only way to restore it causes the system to
	return to its default settings and wipes out the configuration.
	Examples — The following example illustrates the prompts that the
	system displays when the enable password is changed. The passwords
	you enter are not displayed.
	WX1200# set enablepass
	Enter old password: old-password
	Enter new password: new-password
	Retype new password: new-password
	Password changed

See Also

„disable on page 33

„enable on page 34