HP Manager Software manual Idle-timeout, Set ip ssh server, Also disabled

	set ip ssh idle-timeout 155
set ip ssh	Changes the number of minutes an SSH session can remain idle.
idle-timeout	Syntax — set ip ssh idle-timeout minutes
	„ minutes — Number of minutes an SSH session can remain idle. You
	can set the idle timeout to a value from 0 (disabled) to 2,147,483,647
	minutes.
	Defaults — The default idle timeout is 30 minutes.
	Access — Enabled.
	History —Introduced in MSS Version 3.0.
	Usage — If the idle timeout is disabled, MSS changes the default
	absolute timeout from 0 (disabled) to 60 minutes to prevent an
	abandoned session from remaining open indefinitely. 3Com recommends
	using the idle timeout instead to close unused sessions.
	Examples — The following command changes the idle timeout value to
	20 minutes:
	WX4400# set ip ssh idle-timeout 20
	success: idle timeout set to 20 minutes
	See Also
	„ set ip ssh on page 153
	„ set ip ssh absolute-timeouton page 154
	„ set ip ssh server on page 155
set ip ssh server	Disables or reenables the SSH server on a wireless LAN switch.
	CAUTION: If you disable the SSH server, SSH access to the WX switch is
	also disabled.

Syntax — set ip ssh server {enable disable}

„enable — Enables the SSH server.

„disable — Disables the SSH server.

Defaults — The SSH server is enabled by default.