HP Manager Software WX4400# display security acl editbuffer, Syntax display security acl hits

430CHAPTER 12: SECURITY ACL COMMANDS

Examples — To display a summary of the committed security ACLs on a

WX switch, type the following command:

WX4400# display security acl
ACL table	Type	Class	Mapping
ACL
acl----------------------------_123	----	------	-------	In
	IP	Static	Port 2
acl_133	IP	Static	Port 4	In
acl_124	IP	Static

To view a summary of the security ACLs in the edit buffer, type the following command:

WX4400# display security acl editbuffer

ACL edit-buffer table	Type	Status
ACL
acl----------------------------_122	----	--------------
	IP	Not committed
acl_132	IP	Not committed
acl-144	IP	Not committed

See Also

„clear security acl on page 424

„display security acl info on page 431

„set security acl on page 439

display security acl Displays the number of packets filtered by security ACLs (“hits”) on the

hitsWX switch. Each time a packet is filtered by a security ACL, the hit counter increments.

Syntax — display security acl hits

Defaults — None.

Access — Enabled.

History — Introduced in MSS Version 3.0.

Usage — For MSS to count hits for a security ACL, you must specify hits in the set security acl commands that define ACE rules for the ACL.