HP Manager Software manual WX-1200# set snmp security encrypted success change accepted

set snmp security 173

set snmp security Sets the minimum level of security MSS requires for SNMP message exchanges.

Syntax — set snmp security

{unsecured authenticated encrypted auth-req-unsec-notify}

„unsecured — SNMP message exchanges are not secure. This is the only value supported for SNMPv1 and SNMPv2c.

„authenticated — SNMP message exchanges are authenticated but are not encrypted.

„encrypted — SNMP message exchanges are authenticated and encrypted.

„auth-req-unsec-notify— SNMP message exchanges are authenticated but are not encrypted, and notifications are neither authenticated nor encrypted.

Defaults — By default, MSS allows nonsecure (unsecured) SNMP message exchanges.

Access — Enabled.

History —Introduced in MSS Version 4.0.

Usage — SNMPv1 and SNMPv2c do not support authentication or encryption. If you plan to use SNMPv1 or SNMPv2c, leave the minimum level of SNMP security set to unsecured.

Examples — The following command sets the minimum level of SNMP security allowed to authentication and encryption:

WX-1200# set snmp security encrypted success: change accepted.

See Also

„set ip snmp server on page 152

„set snmp community on page 160

„set snmp notify target on page 162

„set snmp profile on page 167