HP Manager Software manual Clear snoop map, „ display snoop info on

570CHAPTER : SNOOP COMMANDS

clear snoop	Deletes a snoop filter.
	Syntax — clear snoop filter-name
	„ filter-name— Name of the snoop filter.
	Defaults — None.
	Access — Enabled.
	History —Introduced in MSS Version 4.0.
	Examples — The following command deletes snoop filter snoop1:
	WX1200# clear snoop snoop1
	See Also
	„ set snoop on page 571
	„ display snoop info on page 577
clear snoop map	Removes a snoop filter from an MAP radio.
	clear snoop map filter-namedap dap-numradio {1 2}
	„ filter-name— Name of the snoop filter.
	„ dap-num— Number of a Distributed MAP to which to snoop filter is
	mapped.

„

„

„

„

„

„

radio 1 — Radio 1 of the MAP.

radio 2 — Radio 2 of the MAP. (This option does not apply to single-radio models.)

Defaults — None.

Access — Enabled.

History —Introduced in MSS Version 4.0.

Examples — The following command removes snoop filter snoop2 from radio 2 on Distributed MAP 3:

WX1200# clear snoop map snoop2 dap 3 radio 2 success: change accepted.