HP Manager Software manual Snoop1, Display snoop stats Output, Snoop stats snoop1

display snoop stats 579

Examples — The following command shows statistics for snoop filter

snoop1:

WX1200# display		snoop stats snoop1	Tx Match	Dropped	Stop-After
Filter	Dap	Radio Rx Match

=========================================================================

snoop 3 1 96 4 0 stopped

Table 108 describes the fields in this display.

Table 108 display snoop stats Output

Field	Description
Filter	Name of the snoop filter.
Dap	Distributed MAP containing the radio to which the filter is
	mapped.
Radio	Radio to which the filter is mapped.
Rx Match	Number of packets received by the radio that match the
	filter.
Tx Match	Number of packets sent by the radio that match the filter.
Dropped	Number of packets that matched the filter but that were not
	copied to the observer due to memory or network problems.
Stop-After	Filter state:
	„	running—enabled
	„	stopped—disabled
	„ number-of-packets—If the filter is running and the
		stop-after option was used to stop the filter, this field
		displays the number of packets that still need to match
		before the filter is stopped.