HP Manager Software manual Set mac-user, Tempvendora into Vlan kiosk1

set mac-user 245

	The following command authorizes access to users on VLANs with names
	matching bld4.* and applies security ACLs svcs_2 to the traffic they send
	and svcs_3 to the traffic they receive:
	WX4400# set location policy permit inacl svcs_2 outacl svcs_3
	if vlan eq bldg4.*
	The following command authorizes users entering the network on WX
	ports 1 and 2 to use the floor2 VLAN, overriding any settings from AAA:
	WX4400# set location policy permit vlan floor2 if port 1-2
	The following command places all users who are authorized for SSID
	tempvendor_a into VLAN kiosk_1:
	WX1200# set location policy permit vlan kiosk_1 iff ssid eq
	tempvendor_a
	success: change accepted
	See Also
	„ clear location policy on page 208
	„ display location policy on page 222
set mac-user	Configures a user profile in the local database on the WX switch for a
	user who can be authenticated by a MAC address, and optionally adds
	the user to a MAC user group.
	(To configure a MAC user profile in RADIUS, see the documentation for
	your RADIUS server.)
	Syntax — set mac-user mac-addr[group group-name]
	„ mac-addr— MAC address of the user, in hexadecimal numbers
	separated by colons (:). You can omit leading zeros.
	„ group-name— Name of an existing MAC user group.
	Defaults — None.
	Access — Enabled.
	History —Introduced in MSS Version 3.0.
	Usage — MSS does not require MAC users to belong to user groups.