HP Manager Software Output of display dap connection, Dap connection serial-id M9DE48B6EAD00

display dap global 295

The following command displays connection information specifically for a

Distributed MAP with serial ID M9DE48B6EAD00:

WX1200# display	dap connection serial-id M9DE48B6EAD00
Total number of	entries:	1	WX IP Address
DAP Serial Id	DAP IP	Address
--- -----------	---------------		---------------
9 M9DE48B6EAD00 10.10.4.88			10.9.9.11

Table 60 describes the fields in this display.

Table 60 Output of display dap connection

Field	Description
DAP	Connection ID you assigned to the Distributed MAP.
	If the connection is configured on another WX switch, this
	field contains a hyphen ( - ).
Serial Id	Serial ID of the Distributed MAP.
DAP IP Address	IP address assigned by DHCP to the Distributed MAP.
WX IP Address	System IP address of the WX switch on which the MAP has
	an active connection. This is the switch that the MAP used
	for booting and configuration and is using for data transfer.

See Also

„display {ap dap} config on page 277

„display dap global on page 295

„display dap unconfigured on page 297

display dap global Displays configuration information for Distributed MAPs configured on WX switches in the Mobility Domain.

Syntax — display dap global [dap-numserial-id serial-ID]

„dap-num— Number of a Distributed MAP for which to display configuration settings.

„serial-idserial-ID— MAP access point serial ID.

Defaults — None.

Access — Enabled.

History —Introduced in MSS Version 3.0.