HP Manager Software manual Syntax set radio-profile name frag-threshold threshold

set radio-profile frag-threshold 339

set radio-profileChanges the fragmentation threshold for the MAP radios in a radio

frag-thresholdprofile. The fragmentation threshold specifies the maximum length a frame is allowed to be without being broken into multiple frames before transmission.

Syntax — set radio-profile name frag-threshold threshold

„name — Radio profile name.

„threshold — Maximum frame length, in bytes. You can enter a value from 256 through 2346.

Defaults — The default fragmentation threshold for MAP radios is 2346 bytes.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Usage — You must disable all radios that are using a radio profile before you can change parameters in the profile. Use the set radio-profile mode command.

Examples — The following command changes the fragmentation threshold for radio profile rp1 to 1500 bytes:

WX4400# set radio-profile rp1 frag-threshold 1500 success: change accepted.

See Also

„display radio-profileon page 298

„set radio-profile mode on page 342

set radio-profileChanges the long retry threshold for the MAP radios in a radio profile.

long-retryThe long retry threshold specifies the number of times a radio can send a long unicast frame without receiving an acknowledgment. A long unicast frame is a frame that is equal to or longer than the Request-to-Send (RTS) threshold.

Syntax — set radio-profile name long-retry threshold

„name — Radio profile name.