HP Manager Software manual „ antennatype ANT1060 ANT1120 ANT1180 internal

316CHAPTER 9: MANAGED ACCESS POINT COMMANDS

„radio 1 — Radio 1 of the MAP.

„radio 2 — Radio 2 of the MAP. (This option does not apply to single-radio models or to the AP8750.)

„antennatype {ANT1060 ANT1120 ANT1180 internal} —

802.11b/g external antenna models:

„ANT1060 — 60° 802.11b/g antenna

„ANT1120 — 120° 802.11b/g antenna

„ANT1180 — 180° 802.11b/g antenna

„internal — uses the internal antenna instead

„antennatype {ANT5060 ANT5120 ANT5180 internal} —

802.11a external antenna models:

„ANT5060 — 60° 802.11a antenna

„ANT5120 — 120° 802.11a antenna

„ANT5180 — 180° 802.11a antenna

„internal — uses the internal antenna instead

„antennatype {ANT3C591 ANT3C592 ANT3C597 ANT3C598 internal} — 802.11a/b/g dual-mode external antenna models:

„ANT3C591 — High gain omni 802.11a/b/g antenna

„ANT3C592 — Ceiling 802.11a/b/g antenna

„ANT3C597 — Hallway 802.11a/b/g antenna

„ANT3C598 — Panel 802.11a/b/g antenna

„internal — uses the internal antenna instead

All radios use the internal antenna by default. (The MAP-262 802.11b/g radio does not have an internal antenna, and uses model ANT1060 by default.)

Access — Enabled.

History — Introduced in MSS Version 3.0. Model numbers added for 802.11a external antennas, and the default changed to internal (except for the MAP-262) in MSS Version 3.2.