HP Manager Software Clear ip telnet, Clear ntp server, Defaults The default Telnet port number is

clear ip telnet 119

clear ip telnet	Resets the Telnet server’s TCP port number to its default value. A WX
	switch listens for Telnet management traffic on the Telnet server port.
	Syntax — clear ip telnet
	Defaults — The default Telnet port number is 23.
	Access — Enabled.
	History — Introduced in MSS Version 3.0.
	Examples — The following command resets the TCP port number for
	Telnet management traffic to its default:
	WX4400# clear ip telnet
	success: change accepted.

See Also

„display ip https on page 129

„display ip telnet on page 133

„set ip https server on page 150

„set ip telnet on page 156

„set ip telnet server on page 157

clear ntp server Removes an NTP server from a WX switch configuration.

Syntax — clear ntp server {ip-addrall}

„ip-addr— IP address of the server to remove, in dotted decimal notation.

„all — Removes all NTP servers from the configuration.

Defaults — None.

Access — Enabled.

History — Introduced in MSS Version 3.0.