HP Manager Software manual Clear dot1x, Bonded-period

478CHAPTER 15: 802.1X MANAGEMENT COMMANDS

Table 86 802.1X Commands by Usage (continued)

Type	Command
Reauthentication, cont.	clear dot1x reauth-maxon page 481
	set dot1x reauth-periodon page 493
	clear dot1x reauth-periodon page 481
Retransmission	set dot1x max-reqon page 489
	clear dot1x max-reqon page 479
Quiet Period and Timeouts	set dot1x quiet-periodon page 491
	clear dot1x quiet-periodon page 480
	set dot1x timeout auth-serveron page 493
	clear dot1x timeout auth-serveron
	page 482
	set dot1x timeout supplicant on page 494
	clear dot1x timeout supplicant on page 482
Settings, Active Clients, and	display dot1x on page 483

	Statistics
clear dot1x	Resets the Bonded Auth period to its default value.
bonded-period	Syntax — clear dot1x bonded-period
	Defaults — The default bonded authentication period is 0 seconds.
	Access — Enabled.
	History —Introduced in MSS Version 3.0.
	Examples — To reset the Bonded period to its default, type the following
	command:
	WX4400# clear dot1x bonded-period
	success: change accepted.

See Also

„display dot1x on page 483

„set dot1x bonded-periodon page 487