HP Manager Software manual Command-Line, Editing, Operating systems, WX1200# reset port

Command-Line Editing 29

„A hyphen-separated range of port numbers, with no spaces. For example:

WX1200# reset port 1-3

„Any combination of single numbers, lists, and ranges. Hyphens take precedence over commas. For example:

WX1200# display port status 1-3,6

Virtual LAN The names of virtual LANs (VLANs), which are used in Mobility Domain™ Identification communications, are set by you and can be changed. In contrast, VLAN

ID numbers, which the wireless LAN uses locally, are determined when the VLAN is first configured and cannot be changed. Unless otherwise indicated, you can refer to a VLAN by either its VLAN name or its VLAN number. CLI set and display commands use a VLAN’s name or number to uniquely identify the VLAN within the WX.

Command-Line	MSS editing functions are similar to those of many other network
Editing	operating systems.

Keyboard Shortcuts The following table lists the keyboard shortcuts for entering and editing CLI commands.

Table 4 Keyboard Shortcuts

Keyboard Shortcut(s)	Function
Ctrl+A	Jumps to the first character of the command line.
Ctrl+B or Left Arrow key	Moves the cursor back one character.
Ctrl+C	Escapes and terminates prompts and tasks.
Ctrl+D	Deletes the character at the cursor.
Ctrl+E	Jumps to the end of the current command line.
Ctrl+F or Right Arrow key	Moves the cursor forward one character.
Ctrl+K	Deletes from the cursor to the end of the command
	line.
Ctrl+L or Ctrl+R	Repeats the current command line on a new line.
Ctrl+N or Down Arrow key	Enters the next command line in the history buffer.
Ctrl+P or Up Arrow key	Enters the previous command line in the history
	buffer.