HP Manager Software manual Display aaa Output

		display aaa 219
Table 45 display aaa Output (continued)
deadtime	Number of minutes the WX switch waits after determining
	a RADIUS server is unresponsive before trying to reconnect
	with this server. During the dead time, the RADIUS server
	is ignored by the WX switch. The default is 0 minutes.
key	Shared secret key, or password, used to authenticate to a
	RADIUS server. The default is no key.
author-pass	Password used for outbound authentication to a RADIUS
	server, used in conjunction with a last-resort username. By
	default, a MAC user’s MAC address is also used as that
	user’s password, and no global password is set.
Radius Servers	Information about active RADIUS servers.
Server	Name of each RADIUS server currently active.
Addr	IP address of each RADIUS server currently active.
Ports	UDP ports that the WX switch uses for authentication
	messages and for accounting records.
T/o	Setting of timeouts on each RADIUS server currently active.
Tries	Number of retransmissions configured for each RADIUS
	server currently active. The default is 3 times.
Dead	Length of time until the server is considered responsive
	again.
State	Current state of each RADIUS server currently active:
	„	UP (operating)
	„	DOWN (unavailable)
Server groups	Names of RADIUS server groups and member servers
	configured on the WX switch.
Web Portal	State of the WebAAA feature:
	„	enabled
	„	disabled
set commands	List of commands used to configure AAA on the WX
	switch.
user and user group	List of user and user group profiles stored in the local
profiles	database on the WX switch.

See Also

„set accounting {admin console} on page 223

„set authentication admin on page 226

„set authentication console on page 228

„set authentication dot1x on page 230