HP Manager Software Absolute-timeout, „ set ip ssh absolute-timeouton, „ set ip ssh server on

154CHAPTER 6: IP SERVICES COMMANDS

	See Also
	„ set ip ssh absolute-timeouton page 154
	„ set ip ssh idle-timeouton page 155
	„ set ip ssh server on page 155
set ip ssh	Changes the number of minutes an SSH session can remain open. The
absolute-timeout	absolute-timeout value applies regardless of whether the session is active
	or idle.

Syntax — set ip ssh absolute-timeout minutes

„minutes — Number of minutes an SSH session can remain open. You can set the absolute timeout to a value from 0 (disabled) to 2,147,483,647 minutes

Defaults — The absolute timeout is disabled by default. 3Com recommends using the idle timeout instead to close unused sessions.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Usage — If the idle timeout is disabled, MSS changes the default absolute timeout from 0 (disabled) to 60 minutes to prevent an abandoned session from remaining open indefinitely.

Examples — The following command changes the absolute timeout value to 30 minutes:

WX4400# set ip ssh absolute-timeout 30 success: absolute timeout set to 30 minutes

See Also

„set ip ssh on page 153

„set ip ssh idle-timeouton page 155

„set ip ssh server on page 155