HP Manager Software manual Set port name, See Also „ clear port-groupon „ display port-groupon

82CHAPTER 4: PORT COMMANDS

To add or remove ports in a group that is already configured, change the mode to off, add or remove the ports, then change the mode to on.

Examples — The following command configures a port group named server1 containing ports 1 through 5, and enables the link:

WX1200# set port-group name server1 1-5 mode on success: change accepted.

The following commands disable the link for port group server1, change the list of ports in the group, and reenable the link:

WX1200# set port-group name server1 1-5 mode off success: change accepted.

WX1200# set port-group name server1 1-4,7 mode on success: change accepted.

See Also

„clear port-groupon page 63

„display port-groupon page 67

set port name	Assigns a name to a port. After naming a port, you can use the port
	name or number in other CLI commands.

Syntax — set port port name name

„port — Number of a physical port. You can specify only one port.

„name name — Alphanumeric string of up to 16 characters, with no spaces.

Defaults — None.

Access — Enabled.

History — Introduced in MSS Version 3.0.

Usage — To simplify configuration and avoid confusion between a port’s number and its name, 3Com recommends that you do not use numbers as port names.