HP Manager Software manual See Also „ clear log trace on

582CHAPTER 21: SYSTEM LOG COMMANDS

Access — Enabled.

History — Introduced in MSS Version 3.0.

Examples — To stop sending system logging messages to a server at 192.168.253.11, type the following command:

WX4400# clear log server 192.168.253.11 success: change accepted.

Type the following command to clear all messages from the log buffer:

WX4400# clear log buffer success: change accepted.

See Also

„clear log trace on page 562

„set log on page 586

display log buffer Displays system information stored in the nonvolatile log buffer or the trace buffer.

Syntax — display log buffer [{+-}number-of-messages] [facility facility-name] [matching string] [severity severity-level]

„buffer — Displays the log messages in nonvolatile storage.

„+- number-of-messages— Displays the number of messages specified as follows:

„A positive number (for example, +100), displays that number of log entries starting from the oldest in the log.

„A negative number (for example, -100) displays that number of log entries starting from newest in the log.

„facility facility-name— Area of MSS that is sending the log message. Type a space and a question mark (?) after display log buffer facility for a list of valid facilities.

„matching string — Displays messages that match a string—for example, a username or IP address.