HP Manager Software manual Display banner, Motd

40CHAPTER 3: SYSTEM SERVICE COMMANDS

„location — Resets the location of the WX switch to null.

„name — Resets the name of the WX switch to the default system name, which is the model number.

	Defaults — None.
	Access — Enabled.
	History — —Introduced in MSS Version 3.0.
	Examples — To clear the location of the WX switch, type the following
	command:
	WX4400# clear system location
	success: change accepted.
	See Also
	„ display config on page 548
	„ display system on page 42
	„ set system contact on page 54
	„ set system countrycode on page 54
	„ set system ip-addresson page 57
	„ set system location on page 58
display banner	Shows the banner that was configured with the set banner motd
motd	command.
	Syntax — display banner motd
	Defaults — None.
	Access — Enabled.
	History — Introduced in MSS Version 3.0.
	Examples — To show the banner with the message of the day, type the
	following command:

WX4400# display banner motd hello world