HP Manager Software manual Set location policy

set location policy 241

The fallthru method is web. (For a wireless authentication rule, the fallthru method is specified by the set service-profileauth-fallthrucommand. For a wired authentication rule, the fallthru method is specified by the auth-fall-thruoption of the set port type wired-authcommand.)

Examples — The following command configures a WebAAA rule in the local WX database for SSID ourcorp and userglob rnd*:

WX4400# set authentication web ssid ourcorp rnd* local success: change accepted.

See Also

„clear authentication web on page 207

„display aaa on page 217

„set authentication admin on page 226

„set authentication console on page 228

„set authentication dot1x on page 230

„set authentication last-resorton page 234

set location policy Creates and enables a location policy on an WX switch. A location policy enables you to locally set or change authorization attributes for a user afer the user is authorized by AAA, without making changes to the AAA server.

Syntax — set location policy deny if {ssid operator ssid-namevlan operator vlan-globuser operator user-glob

port port-list dap dap-num}

[before rule-number modify rule-number ]

Syntax — set location policy permit {vlan vlan-nameinacl inacl-nameoutacl outacl-name}

if {ssid operator ssid-name vlan operator vlan-glob user operator user-glob port port-list dap dap-num} [before rule-number modify rule-number]

„deny — Denies access to the network to users with characteristics that match the location policy rule.